/space.gif/$File/space.gif?OpenElement) | Product
| Description
| Features
| Use**
|
 |
|
A 1.0 mil transparent polyurethane film coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a densified semi-bleached kraft liner.
|
Soft, pliable film provides a high degree of user comfort on most body surfaces. Transparency permits wound visibility with fewer dressing changes allowing less disturbance to the healing surface. Acts as a bacterial barrier with a high moisture vapor transmission rate.
|
Designed for wound care applications, IV placements, and situations requiring high MVTR, transparency and sustained periods of wear. Excellent for use on diaphoretic patients.
|
|
|
A 1.0 mil transparent cast co-polyester film coated on one side with a non-sensitizing acrylic adhesive. The film is supported by a casting sheet; the adhesive is protected by a densified, semi-bleached kraft release liner.
|
Soft, pliable film provides a high degree of user comfort on most body surfaces. Transparency permits wound visibility with fewer dressing changes allowing less disturbance to the healing surface. Acts as a bacterial barrier with a high moisture vapor transmission rate. Casting sheet provides easier handling and application.
|
Designed for wound care applications. IV placements and situations requiring high MVTR, transparency and sustained periods of wear. Excellent for use on pediatric and diaphoretic patients.
|
|
|
A 1.0 mil transparent cast co-polyester film coated on one side with a non-sensitizing acrylic adhesive. The film is supported by a casting sheet; the adhesive is protected by a densified, semi-bleached kraft release liner.
|
Soft, pliable film provides a high degree of user comfort on most body surfaces. Transparent film for wound visibility. Casting sheet enhances ease of use. Soft, gentle, highly breathable adhesive acts as a bacterial barrier with EXTREMELY HIGH MVTR.
|
Designed for wound care applications. IV placements and situations requiring high MVTR, transparency and sustained periods of wear.
|
|
|
A 2.0 mil transparent polyurethane film coated on one side with an nonsensitizing acrylic adhesive. The adhesive is protected by a densified semi- bleached kraft release liner
|
Soft, pliable non-glare film provides a high degree of user comfort on most body surfaces. Transparency permits wound visibility with fewer dressing changes allowing less disturbance to the healing surface. Acts as a bacterial barrier with moderate MVTR. Film gauge allows for easy handling.
|
Designed for wound care applications. IV placements and situations requiring bacterial barrier, transparency and sustained periods of wear. Excellent for use on pediatric and diaphoretic patients.
|
|
|
A 3.0 mil clear polyethylene film coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a densified kraft release liner.
|
Clear polyethylene facestock provides conformability and improved device performance.
|
A multipurpose film suitable for use as a surgical tape and in the fabrication of medical devices.
|
|
|
A 2.0 mil polyester film/foil laminate coated on one side with an adhesive system that bonds very well to medical foams. The adhesive is protected by a densified semi-bleached kraft release liner.
|
Comformable laminate, stable and aggressive adhesive system, easy to die cut and release from liner.
|
Designed for bonding foam for medical devices where high strength is required.
|
|
|
A 3.0 mil tan colored vinyl film coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a densified kraft release liner.
|
Conformable and comfortable to wear. Tan color reduces device visibility. Firm, stable adhesive with densified kraft liner die cuts cleanly.
|
Designed as a bandage film. Also, widely used to mount transdermal drugs, electromedical, ostomy and other devices to human skin for sustained periods.
|
|
|
A single coated 1 mil polyurethane film with 18 mils of hydrocolloid adhesive. The adhesive is protected by a polycoated release liner coated on both sides with a silicone release coating.
|
Highly absorbent, will not break down upon saturation, no animal derived components. Controlled
cold flow. Can be gamma or E-beam sterilized.
|
Designed for wound care, ostomy and fixation of medical devices.
|
|
|
A single coated 1 mil polyurethane film with 39 mils of hydrocolloid adhesive. The adhesive is protected by a polycoated release liner coated on both sides with a silicone release coating.
|
Highly absorbent, will not break down upon saturation, no animal derived components. Controlled
cold flow. Can be gamma or E-beam sterilized.
|
Designed for wound care, ostomy and fixation of medical devices.
|
| Product
| Description
| Features
| Use**
|
| | | | |
|
|
A 1/8" 2 lb/ft3 white, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Thicker caliper foam offering softness and conformability. Value Priced.
|
Designed for mounting electrodes, grounding pads and other devices to human skin for sustained periods.
|
|
|
A 1/16" 4 lb/ft3 white, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Soft, flexible, thin foam; offers improved conform- ability to skin contours. Easy to die-cut and convert. Value priced.
|
Designed for mounting electrodes, dispersive pads and other devices to human skin for sustained periods.
|
|
|
A 1/16" 4 lb/ft3 white, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Softer, flexible, thin foam; offers improved con- formability to skin contours. Heavy adhesive- coat weight aggressively bonds to skin, especially under stress conditions. Value priced.
|
Designed for mounting electrodes, grounding pads and other devices to human skin for sustained periods. Specially engineered for stress electrodes. More aggressive than MED 5635.
|
|
|
A 1/32" 6 lb/ft3 white, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Softer, flexible, thin foam, with improved con-
formability to skin counters. Higher density foam provides greater strength. Value priced.
|
MED 5637 was designed for transdermal drug delivery, electromedical, and other devices to human skin for sustained periods.
|
|
|
A 1/32" 6 lb/ft3 white, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Higher density foam with heavy coat weight of adhesive that aggressively bonds to skin minimizing adhesion loss under stress conditions. Value priced.
|
Value plus performance design for mounting electrodes and medical devices for sustained periods.
|
|
|
A 1/16" 4 lb/ft3 blue, cross-linked polyethylene foam coated on one side with a nonsensitizing acrylic adhesive. The adhesive is protected by a white polyethylene coated release liner.
|
Soft, flexible, thin foam; comfortable to wear. Conformable to most body surfaces maximizing electrode performance. Brilliant blue color allows for product differentiation from standard white foam.
|
Designed for mounting electrodes, grounding pads and other devices to human skin for sustained periods.
|